Purity 99%: Mixed Aromatics with purity 99% is used in the formulation of high-quality gasoline, where increased combustion efficiency and reduced engine knocking are achieved.

Boiling Range 120-160°C: Mixed Aromatics with a boiling range of 120-160°C is used in industrial solvent applications, where efficient dissolution of resins and rapid evaporation rates are ensured.

Aromatic Content > 90%: Mixed Aromatics with aromatic content greater than 90% is used in adhesive manufacturing, where strong solvency power enhances adhesive strength and substrate compatibility.

Sulfur Content < 10 ppm: Mixed Aromatics with sulfur content below 10 ppm is used in the production of low-emission fuels, where regulatory compliance and reduced sulfur oxide emissions are facilitated.

Viscosity 0.7-0.9 cSt: Mixed Aromatics with viscosity between 0.7 and 0.9 cSt is used in paint formulations, where optimal flow properties and smooth film formation are achieved.

Flash Point > 30°C: Mixed Aromatics with a flash point above 30°C is used in ink production, where safer handling and storage conditions are provided.

Density 0.87 g/cm³: Mixed Aromatics with a density of 0.87 g/cm³ is used in lubricant blends, where stable phase separation and uniform product consistency are delivered.

Distillation Range 95% at 160°C: Mixed Aromatics with a distillation range of 95% at 160°C is used in rubber processing, where consistent volatility and efficient processability are attained.

Stability Temperature 60°C: Mixed Aromatics with stability at 60°C is used in cleaning agents, where extended shelf life and consistent cleaning performance are observed.

Color < 30 APHA: Mixed Aromatics with color below 30 APHA is used in specialty chemicals, where minimal color interference and enhanced end-product aesthetics are maintained.