© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: Vonorazine Fumarate
Chemical Family: Pharmaceutical intermediate
CAS Number: 1234567-89-0
Recommended Use: Laboratory chemical, research and pharmaceutical manufacture
Manufacturer: Confidential supplier information
Contact for Emergency: Local poison control center or company emergency number
Synonyms: No common synonyms in public databases
Product Code: VFN-001
Classification: Not classified as acutely toxic, may cause respiratory tract irritation, skin sensitization possible on direct exposure, hazardous if ingested in large quantities
Signal Word: Warning
Hazard Statement: May cause mild eye/skin irritation, not a combustible substance under recommended conditions
Pictograms: Exclamation mark (for irritant properties)
Precautionary Statement: Handle with care, avoid inhalation, use with good ventilation
Other Hazards: Information on long-term exposure limited; data gaps exist for rare environmental or human exposure
Chemical Name: Vonorazine Fumarate
Concentration: 98% and above (active pharmaceutical material)
Impurities: Impurities from synthesis process less than 1.5% (types may include trace byproducts of organic reactions)
Molecular Formula: C20H18FN5O2·C4H4O4
Molecular Weight: 525.5 g/mol
Other Inclusions: Small amounts of water (below 1%), possible residual solvents depending on batch history
Inhalation: Move person to area with fresh air, support breathing as needed, seek medical advice if symptoms develop or persist
Skin Contact: Wash exposed skin thoroughly with soap and water, remove contaminated clothing, seek attention if rash or irritation develops
Eye Contact: Rinse eyes with plenty of water for at least 15 minutes, blink frequently, remove contact lenses if present, consult healthcare if discomfort or redness continues
Ingestion: Rinse mouth with water, do not attempt to induce vomiting, monitor for symptoms such as nausea, call poison center or health professional
Recommendations for Physicians: Treat symptomatically, monitor exposed individuals for allergic responses or respiratory symptoms
Suitable Extinguishing Media: Water spray, dry chemical powder, carbon dioxide, foam
Fire Hazards: No unusual fire or explosion hazards under standard handling; in case of fire, hazardous decomposition possible such as carbon oxides, nitrogen oxides, hydrogen fluoride
Protective Equipment: Wear self-contained breathing apparatus, chemical protective clothing
Special Procedures: Use caution to avoid inhaling smoke or vapors, cool containers exposed to flames with water spray
Combustion Products: Carbon dioxide, carbon monoxide, nitrous gases, fluoride compounds
Personal Precautions: Use appropriate personal protective equipment (PPE) such as gloves, lab coat, goggles, and face shield
Spill Response: Prevent dust formation, sweep up spilled powder avoiding airborne dispersal, transfer material to sealed container for disposal
Environmental Precautions: Avoid release to drains or natural waterways, notify environmental response teams if significant quantities enter water systems
Cleaning Method: Ventilate area, moisten residue to avoid dust, collect residues with absorbent material suitable for chemical disposal
Handling: Avoid inhalation, contact with eyes and skin, wear chemical-resistant gloves, operate in well-ventilated fume hood spaces, wash hands thoroughly after use
Storage Conditions: Store in tightly closed original container, away from heat and sunlight, keep away from incompatible substances such as oxidizers and acids, maintain regular monitoring for any container leakage
Incompatible Materials: Strong oxidizing agents, mineral acids
Special Precautions: Store only by professionals familiar with pharmaceutical handling, maintain security and access control for regulated substances
Occupational Exposure Limits: No government-mandated exposure limits set for this specific molecule; reduce exposure to as low as achievable with engineering and control technologies
Engineering Controls: Use chemical fume hood, appropriate local exhaust ventilation, laboratory grade air monitoring as practical
Respiratory Protection: Wear NIOSH-certified dust/mist respirator when handling significant quantities
Skin Protection: Chemical-resistant gloves (nitrile or neoprene preferred), long-sleeved clothing, impermeable lab coats
Eye/Face Protection: Splash-resistant safety goggles, face shield for bulk handling
Hygiene Measures: Regular hand washing, avoid eating, drinking, or smoking during materials handling, remove contaminated clothing before leaving work area
Appearance: Off-white to slightly yellow crystalline powder
Odor: Nearly odorless
pH: Slightly acidic in solution
Melting Point: 260-270°C (estimated range)
Boiling Point: Data not available due to decomposition before boiling
Flash Point: Not relevant, non-flammable solid
Solubility: Freely soluble in dimethyl sulfoxide, limited solubility in water and ethanol
Vapor Pressure: Negligible at ambient conditions
Partition Coefficient (log Kow): Data not available, predicted to be moderate
Stability: Stable under recommended storage and handling; avoid excess heat and moisture
Decomposition Products: May produce toxic fumes of carbon and fluorine compounds if strongly heated
Chemical Stability: Chemically stable under standard laboratory and storage conditions
Reactive With: Avoid interaction with potent oxidants, acids, and bases
Hazardous Decomposition: Releases toxic gases including CO, CO2, NOx, HF at high temperatures
Possibility of Hazardous Reactions: Polymerization not expected
Conditions to Avoid: Elevated temperature, open flame, extended exposure to moisture
Likely Routes of Exposure: Inhalation, skin contact, eye contact, ingestion
Acute Toxicity: Low estimated acute toxicity, data limited; high exposures may irritate mucous membranes
Chronic Toxicity: No long-term data available for repeated low-level exposure
Skin Irritation: Mild local irritation possible
Eye Irritation: Can cause discomfort and short-lived redness
Sensitization: Data sparse, rare sensitization may occur on repeated skin contact
Carcinogenicity: Not listed as a carcinogen by IARC, NTP, OSHA
Other Effects: Limited animal studies, not recognized as mutagenic or teratogenic by regulatory agencies, absence of comprehensive human data
Aquatic Toxicity: Expected low toxicity to aquatic organisms based on chemical structure, but data lacking
Persistence and Degradability: Likely to degrade slowly in natural environments
Bioaccumulation Potential: Bioaccumulation not expected, molecular structure limits environmental buildup
Mobility in Soil: Absorption to organic matter possible, runoff unlikely in solid form
Other Adverse Effects: Not associated with known ozone-depleting properties
Hazard Classification: Hazardous chemical waste for pharmaceutical products
Recommended Disposal: Incinerate under controlled conditions at authorized chemical disposal facilities, consult local, state, or national regulations before disposal
Packaging Disposal: Triple rinse empty containers and puncture before landfill or incinerator disposal
Do Not: Release into drainage systems or municipal waste
Alternative Disposal: Contact licensed professional waste disposal service if necessary, document chain of custody for waste material
UN Number: Not assigned for bulk transport under typical research and pharmaceutical use
Transport Hazard Class: Not regulated for ground, air, or sea shipment as per ADR, IATA, IMDG
Packing Group: Not regulated
Labeling Requirements: Mark outer cartons for pharmaceutical shipments, handle as non-hazardous for routine packaging
Environmental Hazards in Transport: Not classified as marine pollutant; accidental release response readiness recommended for bulk shipments
Special Precautions: Ship in original sealed containers, avoid stacking heavy loads, document for traceable receipt and transfer
National Regulations: Not listed as a controlled substance in primary regulatory systems (US EPA, EU REACH, OSHA)
Inventory Listings: Not present on major chemical inventories for bulk industrial chemicals; restricted to research, medical, advanced manufacturing contexts
Labelling: Requires labelling as laboratory chemical, not for diagnostic or human use unless approved
Workplace Classification: Treat as hazardous chemical under OSHA Laboratory Standard, follow prudent practice for pharmaceuticals
Other Compliance: Observe all applicable federal, state, and local safety and environmental laws
