Wusu, Tacheng Prefecture, Xinjiang, China admin@sinochem-nanjing.com 3389378665@qq.com
Follow us:



Understanding the Safety Profile of Isoamyl Butyrate: A Closer Look at Its Material Safety Data

Identification

Name: Isoamyl Butyrate
Chemical Formula: C9H18O2
Molecular Weight: 158.24 g/mol
Appearance: Clear to slightly yellowish liquid, fruity odor
Common Uses: Flavors and fragrances, some laboratory applications
CAS Number: 106-27-4

Hazard Identification

Classification: Flammable liquid, irritant
Health Hazards: May cause irritation to eyes, skin, and respiratory system
Environmental Hazards: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
Signal Word: Warning
Pictograms: Flammable, Irritant
Main Routes of Entry: Inhalation, skin contact, ingestion
Potential Symptoms: Headache, dizziness, skin redness, eye discomfort, coughing

Composition / Information on Ingredients

Substance: Isoamyl Butyrate
Concentration: Typically pure (over 98%)
Additives or Impurities: None known in standard grades
Chemical Synonyms: 3-methylbutyl butyrate, Isopentyl butyrate
Relevant Identifiers: EC No: 203-392-4

First Aid Measures

Inhalation: Remove person to fresh air, provide oxygen if breathing is difficult, seek medical attention if symptoms persist
Skin Contact: Wash area with soap and plenty of water, remove contaminated clothing, consult a physician if irritation develops
Eye Contact: Rinse immediately with plenty of water for at least 15 minutes, keep eyelids open, seek medical advice if sensation continues
Ingestion: Rinse mouth with water, do not induce vomiting, get medical attention right away if large quantity is swallowed or symptoms arise

Fire-Fighting Measures

Suitable Extinguishing Media: Foam, carbon dioxide, dry chemical, water spray in fog form
Unsuitable Media: Direct water jet
Combustion Hazards: Releases irritating and toxic fumes (including carbon monoxide, carbon dioxide) during combustion
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear
Special Procedures: Avoid inhaling vapors; cool exposed containers with water spray to prevent pressure build-up and potential explosion

Accidental Release Measures

Personal Precautions: Evacuate unnecessary personnel from area, wear protective gloves and eye protection, avoid breathing vapors
Spill Cleanup: Use non-combustible absorbent material (sand, earth, vermiculite), shovel into containers for disposal, ventilate confined areas
Environmental Precautions: Prevent from entering sewers, surface or groundwater; notify authorities if large spills reach water bodies

Handling and Storage

Safe Handling: Avoid exposure, do not breathe vapors, use only in well-ventilated areas, keep away from heat, sparks, open flames
Storage Requirements: Store in tightly closed original container in a cool, dry, well-ventilated place, away from incompatible substances such as strong oxidizers
Incompatible Materials: Strong acids, bases, oxidizing agents
Other Precautions: Ground/bond container and receiving equipment, avoid prolonged or repeated exposure

Exposure Controls and Personal Protection

Engineering Controls: Local exhaust ventilation, mechanical ventilation to control airborne levels
Personal Protection: Nitrile or neoprene gloves, safety goggles, lab coats or appropriate protective clothing
Respiratory Protection: Approved respirators in case of high vapor concentration or accidental release
Hygiene Measures: Wash hands thoroughly after use, avoid contact with skin, eyes, and clothing, do not eat, drink, or smoke during use

Physical and Chemical Properties

State: Liquid
Color: Colorless to pale yellow
Odor: Fruity, pleasant
Boiling Point: Around 192°C
Melting Point: -70°C
Flash Point: 66°C
Density: 0.87 g/cm³ at 20°C
Solubility: Slightly soluble in water, soluble in most organic solvents (alcohols, ethers)
Vapor Pressure: Low at room temperature

Stability and Reactivity

Chemical Stability: Stable under recommended storage conditions
Reactivity: May react with strong oxidizing agents to produce hazardous conditions
Hazardous Decomposition Products: Carbon monoxide, carbon dioxide, various organic compounds under fire conditions
Polymerization: Does not undergo dangerous polymerization under normal use

Toxicological Information

Acute Toxicity: Low toxicity expected based on available data for similar esters; may cause mild skin or respiratory irritation
Skin Sensitization: May cause irritation on prolonged or repeated exposure
Eye Effects: Direct contact may cause stinging, redness, or watering
Inhalation Risks: High vapor concentrations may cause headache, drowsiness, or respiratory discomfort
Ingestion Risks: May cause gastric upset, nausea, vomiting after swallowing significant quantities

Ecological Information

Ecotoxicity: Toxic to aquatic life on acute exposure; longer-term impacts possible, especially if spilled in large quantities
Persistence: Likely to biodegrade under aerobic conditions, slower in anaerobic environments
Bioaccumulation: Not considered to have significant bioaccumulation potential
Mobility: Migrates in soil, can contaminate water sources if discharged carelessly

Disposal Considerations

Waste Treatment: Incineration under controlled conditions is preferred, follow national or local guidelines for chemical wastes
Packaging Disposal: Rinse containers thoroughly before recycling or discarding, never discard in regular landfill or natural environment
Environmental Precaution: Avoid release to water bodies or soil, always keep waste segregated from incompatible substances

Transport Information

UN Number: UN 3272 (for flammable liquids, n.o.s.)
Transport Category: Flammable liquid
Label Required: Flammable liquid hazard symbol
Special Precautions: Secure loads against tipping, do not expose to direct sunlight or temperature extremes during transport, always check container integrity before movement

Regulatory Information

Global Inventory Listings: Registered in major chemical inventories including REACH, TSCA
Hazard Symbols: As per GHS, classified for flammability and mild irritancy
Workplace Labelling: Required under OSHA, CLP, and GHS systems for containers and working solutions
Restrictions: No severe restrictions, but always follow occupational exposure limits set by local authorities
Employee Training: Training in handling, spill response, and use of PPE constitutes a solid line of defense against incidents