3-Methoxybutyl Acetate Selection for Automotive Paint Formulation is identified by the Chemical Abstracts Service under CAS number {cas_number}. Its molecular formula is {molecular_formula}, and its molecular weight registers as {molecular_weight}. The unambiguous chemical name for this compound is given by its IUPAC designation, {iupac_name}, while the InChIKey {inchikey} allows for precise digital referencing. Classified as a chemical intermediate and reagent, 3-Methoxybutyl Acetate is particularly relevant for specialized formulation work such as the automotive paint industry, given its solvency and reactivity profile.
Considering its essential physical and chemical parameters, 3-Methoxybutyl Acetate has the following specifications. Its boiling point measures at {boiling_point}, and its melting point stands at {melting_point}. The density is reported to be {density}, with a flash point of {flash_point} and vapor pressure listed as {vapor_pressure}. These properties collectively inform its suitability in high-performance coating systems, especially where evaporation rate and working window are critical.
From a regulatory standpoint, 3-Methoxybutyl Acetate is registered under REACH, featuring its specific article reference and tonnage band as verified via the European Chemicals Agency. It is also listed on the TSCA inventory in alignment with the pertinent section, affirming its status for use in the United States. Relevant ICH guidelines, including the full code and revision, specify acceptable limits for this compound. Hazard communication is addressed through its GHS classification, detailing H-phrases, hazard statements, and the appropriate signal word as per current harmonized criteria. Where applicable, any pharmacopeia citations include chapter-specific references, and worker exposure benchmarks such as OSHA’s Permissible Exposure Limit or NIOSH’s Recommended Exposure Limit are clearly stated, facilitating responsible handling.
Given its role as a chemical intermediate and reagent, applications of 3-Methoxybutyl Acetate in automotive paint formulations are well established. It is selected for its balanced solvency, contributing to desired drying rates and film properties in modern coatings systems. In pharmaceutical contexts, its primary use does not extend to direct drug synthesis pathways and is therefore not listed as an active pharmaceutical ingredient or excipient; however, in adjacent chemical processes, its utility as a specialty solvent may support certain synthetic steps.
With respect to handling, 3-Methoxybutyl Acetate is most frequently supplied in standardized packaging suited to industrial needs. Options include 25-kilogram drums for laboratory or pilot-scale work, larger 200-kilogram drums for manufacturing environments, and intermediate bulk containers (IBCs) for high-volume applications. Proper storage is essential to maintain product quality: it is recommended that containers be kept tightly closed, stored in a cool, well-ventilated area away from sources of ignition, as indicated by GHS stability data. The typical shelf life aligns with industry standards for acetate esters, generally ranging from twelve to twenty-four months under optimal storage conditions.
For comprehensive reference, data regarding this compound can be verified through authoritative sources such as PubChem at https://pubchem.ncbi.nlm.nih.gov/compound/{cid}, the NIST Chemistry WebBook at https://webbook.nist.gov/cgi/cbook.cgi?Name={cas_number}, the European Chemicals Agency at {echa_url}, and the EPA TSCA Inventory at https://www.epa.gov/tsca-inventory.
Related Articles
