© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Chemical Name: Tert-Butyl Perneoheptanoate
Concentration: Up to 77% active substance, at least 23% Type A Diluent
Appearance: Clear to slightly cloudy liquid, faint characteristic odor
Common Use: Often found in polymerization initiators and specialty chemical processing
Labeling: Corrosive label required, oxidizer symbol under transport and storage guidelines
Physical State: Liquid, no visible sediment in stable storage conditions
Physical Hazards: Strong oxidizer, brings a significant risk of fire through contact with fuels or reducing agents
Health Hazards: Causes skin and eye irritation, risk of severe eye injury if not addressed quickly, inhalation of vapors may trigger coughing, headaches, or respiratory discomfort
Environmental Hazards: May cause harm to aquatic life if released into lakes or streams
GHS Signal Word: Danger, reflecting its strong reactivity and corrosive properties
Recommended PPE: Gloves, goggles, chemical-resistant clothing
Main Ingredient: Tert-Butyl Perneoheptanoate, up to 77% by content
Diluent: Type A, not less than 23%, acting as a stabilizer and transport medium
Impurities: Trace organic peroxides, possibly minor acids or residual process solvents
Mixture Nature: Liquid blend, no solids suspended under correct handling
Eye Exposure: Rinse eyes with water for several minutes, remove contact lenses if safe to do so, call for medical attention right away
Skin Exposure: Remove contaminated clothing, flush skin thoroughly with soap and water, avoid direct contact while cleaning
Inhalation: Move person to fresh air, assist breathing if needed, seek emergency medical care for persistent symptoms
Ingestion: Rinse mouth, never induce vomiting, obtain medical attention immediately due to risk of corrosive damage
Suitable Extinguishing Agents: Foam or dry chemical, water may spread the reaction if directly sprayed
Fire Hazards: Decomposes under heat, releasing irritating gases such as carbon oxides and possibly flammable organic fragments
Special Equipment: Firefighters need self-contained breathing apparatus and full chemical protection
Precautions: Evacuate area, avoid inhaling toxic fumes, cool adjacent containers with water spray to avoid heat build-up
Personal Precautions: Prevent skin and eye contact, ventilate area, keep sources of ignition away
Spill Clean-up: Absorb with non-combustible materials such as sand or vermiculite, scoop into inert waste containers, ventilate area well after removal
Disposal: Collect using spark-proof tools, avoid washing into drains
Environmental Protection: Avoid release to soil or water systems, use boom barriers if spill threatens waterway
Safe Handling: Only open containers in well-ventilated areas, never use near open flame or hot surfaces, ground containers to prevent static discharge
Storage Conditions: Store in cool, dry, well-ventilated facility, keep away from sunlight and heat sources, separate from acids and reducing agents
Container Requirements: Resistant to corrosion, tight-sealed, labeled clearly for oxidizing substance
Engineering Controls: Strong local exhaust ventilation, explosion-proof equipment in high-volume settings
Eye/Face Protection: Safety goggles, faceshields for splash-prone situations
Skin Protection: Chemical-resistant gloves made from nitrile or neoprene, long-sleeved protective clothing
Respiratory Protection: Organic vapor mask where vapors exceed exposure limits
Work Practices: No eating or drinking in storage or use areas, regular hand washing after handling
State: Liquid at room temperature
Color: Transparent to slightly yellowish
Odor: Subtle, sweetish or ester-like aroma
Boiling Point: Tends to decompose before reaching boiling due to peroxide instability
Melting Point: Not applicable with ordinary handling
Solubility: Poor water solubility, miscible with organic solvents
Vapor Pressure: Moderate, rises with temperature
Explosion Risk: High under heat, shock, or contamination with reducing agents
Chemical Stability: Stable under cold, well-ventilated storage, sensitive to heat, light, and contamination
Incompatible Materials: Strong acids, strong bases, reducing agents, organic fuels
Decomposition: Produces irritant and potentially toxic gases, risk of explosive runaway with thermal exposure
Polymerization Hazard: None expected, but accidental mixing with certain catalysts brings runaway risk
Acute Effects: Causes severe irritation to mucous membranes, burning of eyes and skin, ingestion brings risk of organ damage
Chronic Effects: Prolonged contact linked to dermatitis or chronic lung irritation in sensitive individuals
Sensitization: Not typical, but individual cases exist
Carcinogenicity: Not listed by major agencies as a carcinogen to date
Target Organs: Eyes, skin, respiratory system, digestive tract
Aquatic Toxicity: Harmful to fish and aquatic invertebrates in moderate doses
Persistence: Tends to break down slowly in the environment, especially away from sunlight
Bioaccumulation: Unlikely due to fast breakdown of active peroxide group
Soil Interaction: Can disrupt beneficial soil microbes if spilled in large quantities
Waste Handling: Gather in closed, labeled hazardous waste containers, use an experienced hazardous waste disposer
Incineration: Only permitted in chemical incinerators with afterburner and scrubber
Discharge to Sewer: Not allowed, due to persistence and risk of reactivity with waste streams
Spent Packaging: Treat as hazardous, triple rinse, puncture before discarding, never burn
Shipping Classification: Classified as Dangerous Goods due to oxidizing nature
Packing Group: II or III, depending on concentration and package size
Labeling: Needs oxidizer label, corrosive symbol, no transport with organic peroxides or flammable liquids
Transport Precautions: Keep upright, insulated, protected from sunlight and physical shocks
Occupational Limits: No established workplace exposure limit in many jurisdictions, but reference general organic peroxide guidelines
Environmental Release: Subject to notification requirements under most hazard communication and environmental laws
Worker Right-to-Know: Employers must provide safe handling training, clear labeling, and material access to workers
Restrictions: Prohibited for consumer use, allowed only in controlled industrial and laboratory settings
