© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Chemical Name: (Rs)-2-[4-(5-Trifluoromethyl-2-pyridyloxy)phenoxy]butyl propionate
Common Names: Not widely known outside of specialized sectors
CAS Number: Specific CAS data required for official documentation
Intended Use: Industrial and research applications, exposure typically limited to professionals familiar with handling niche organic compounds
Physical Form: Often appears as a liquid or crystalline solid, typical of esters with similar backbones
Odor: Expect an organic, potentially ether-like odor, not recommended for direct inhalation under any circumstances
Acute Effects: Skin and eye irritation show up most frequently; noticed among workers during improper handling
Inhalation Exposure: Respiratory system discomfort, headache possible if vapor inhaled
Chronic Exposure: Long-term studies rarely exist for such specific molecules; consult larger chemical family effects
Fire Risk: Flammable or combustible depending on solvent content and workplace setup
Environmental Hazard: Trifluoromethyl groups signal persistent, non-biodegradable compounds in water sources
Main Component: (Rs)-2-[4-(5-Trifluoromethyl-2-pyridyloxy)phenoxy]butyl propionate, expected purity above 95% in technical use
Significant Impurities: Unreacted starting materials, possible byproducts from pyridyloxy and propionate synthesis routes
Stabilizers: Absent in most research grades; quality may drop without proper storage
Solvents: Sometimes supplied pre-dissolved in polar aprotic solvents
Inhalation: Remove affected person to fresh air; medical attention if symptoms persist
Skin Contact: Rinse with soap and water thoroughly; remove contaminated clothing
Eye Contact: Flush with running water for several minutes, avoid rubbing eyes to limit chemical transfer
Ingestion: Rinse mouth, avoid inducing vomiting except under professional advice
Suitable Extinguishing Media: Use dry chemical, CO2, or foam rather than water to handle small lab fires
Special Hazards: Burning releases toxic fumes, often including hydrogen fluoride and other halide residues
Protective Equipment: Standard fire-retardant gear, breathing apparatus essential during material combustion
Firefighter Guidance: Ventilate area; avoid downwind exposure
Personal Precautions: Restrict access, ventilate affected zone; staff best prepared with gloves, goggles, and respiratory masks
Environmental Precautions: Prevent substance from entering drains, surface water, or soil as persistence in the environment remains high
Clean-up Methods: Absorb spills with inert material (sand, vermiculite); dispose of in sealed containers for professional disposal
Handling Guidelines: Use only inside chemical fume hoods, never handle with bare skin or in confined areas
Storage Conditions: Keep in tightly closed bottles, away from heat, flames, and all forms of moisture
Incompatible Materials: Strong oxidizers and acids lead to unpredictable reactions
Stability Threats: Moisture, light, and prolonged air exposure cause degradation
Engineering Controls: Fume cabinets required, especially during chemical transfer or weighing
Eye/Face Protection: Chemical splash goggles shield against minor mishaps
Skin Protection: Gloves made from nitrile or similar impermeable polymers
Respiratory Protection: Dust mask or preferably half-face respirator in cases of aerosol or vapor risk
Workplace Hygiene: No food, drink, or unprotected contact permitted in work zone
Appearance: Colorless to pale yellow liquid, depending on sample age and purity
Odor: Distinct chemical aroma, reminiscent of fluorinated pyridines
Boiling Point: Higher than water, sits somewhere typical for propionate esters
Melting Point: Can solidify under low temperatures in pure state
Solubility: Low in water, soluble in many organic solvents
Vapor Pressure: Not especially high; avoid heating to limit vapor formation
Chemical Stability: Stable under recommended storage, slow decomposition if left exposed to air or moisture
Conditions to Avoid: High temperatures, open flames, direct sunlight, wet environments
Hazardous Decomposition Products: Release of toxic vapors, including fluorinated and nitrogenous gases, during combustion
Reactivity: Reacts with strong acids or bases, oxidizers, and reducing agents
Acute Toxicity: Irritant to skin and eyes, danger grows with concentrated or prolonged exposure
Inhalation Risk: Respiratory irritation dominates over systemic toxicity
Carcinogenicity: Insufficient data for this compound, fluorinated aromatics sometimes linked to toxicological concerns in animal models
Sensitization: Repeated contact could cause skin sensitization in susceptible individuals
Long-Term Effects: Unknown for this particular molecule; adjacent chemical classes require careful evaluation
Aquatic Toxicity: Persistent and poorly biodegradable; risk to aquatic organisms builds up with repeated spills
Mobility: Low water solubility but could move with organic solvent runoff
Bioaccumulation: Trifluoromethylated chains resist biological breakdown, likely to persist in food chains
Environmental Impact: Industrial users need strict waste capture systems
Safe Disposal: Delegate to licensed chemical waste handlers with permits for halogenated organic substances
Incineration: Requires high-temperature, specialist furnaces with scrubbers for hazardous gases
Contaminated Packaging: Clean thoroughly before recycling, or treat as hazardous waste
Drain Disposal: Unacceptable; modern practice rejects sewering for any persistent halogenated organics
Local Regulations: Shipping governed by rules for toxic and aquatic-hazardous chemicals
Packaging: Secure, leak-proof bottles inside secondary containers, absorbent cushioning as a must
Labels: Clear hazard markings for skin, eye, and environmental risks
Transit Conditions: Protect from physical shock and temperature swings; access granted only to trained couriers
Restrictions: Not broadly available to general public, use restricted to institutions with chemical safety training
Workplace Rules: Compliance with workplace hazardous substance protocols stands mandatory
Waste Release: Follows national rules for halogenated waste; unauthorized release carries legal penalties
Import/Export: Some jurisdictions demand preregistration or proof of use for research or industry
