Product Name: Idebenone
Chemical Formula: C19H30O5
CAS Number: 58186-27-9
Synonyms: 6-(10-Hydroxydecyl)-2,3-dimethoxy-5-methyl-1,4-benzoquinone
Recommended Use: Research, biochemical studies, skin care manufacturing
Manufacturer Contact: Direct communications to suppliers or producer for safety information and supply chain traceability
GHS Classification: Eye irritation (Category 2), Skin irritation (Category 2), Specific target organ toxicity-single exposure (Category 3, respiratory tract irritation)
Signal Word: Warning
Hazard Statements: Causes skin irritation, causes serious eye irritation, may cause respiratory irritation
Pictograms: Exclamation mark symbol for general irritant properties
Potential Health Effects: Eyes may water or become inflamed upon contact, skin may redden, inhaled dust or powder can lead to coughing and sneezing, ingestion may cause nausea
Main Ingredient: Idebenone 99%–100%
Impurities: Trace related quinone derivatives, none exceeding safe limits for laboratory use
Form: Solid, powder or crystalline, yellow to orange in color
General Advice: Remove from exposure immediately, seek medical evaluation for significant reactions
Eye Contact: Rinse thoroughly with water for 15 minutes, remove contact lenses if present, consult physician
Skin Contact: Wash area with soap and plenty of water, remove contaminated clothing and wash before reuse
Inhalation: Relocate person to fresh air, keep comfortable for breathing, access medical care if symptoms persist
Ingestion: Rinse mouth, drink several cups of water, avoid forced vomiting, consult healthcare professional quickly
Suitable Extinguishing Media: Water spray, dry chemical powder, carbon dioxide, foam
Hazardous Combustion Products: Carbon oxides (CO, CO2), acrid fumes, benzoquinone derivatives
Fire Fighting Instructions: Wear full protective gear, self-contained breathing apparatus, avoid exposure to combustion gases, cool containers with water, stay upwind and keep exits accessible
Personal Precautions: Use personal protective equipment (PPE), ventilate area, avoid dust creation, remove ignition sources
Cleanup Methods: Sweep up material without generating dust, transfer to container for disposal, wipe area with damp cloth, decontaminate equipment
Environmental Precautions: Prevent release to sewers, soil, or waterways, report larger spills to appropriate authorities for coordinated cleanup
Handling: Operate in well-ventilated areas, avoid direct contact and inhalation, wear gloves, lab coat, and eye protection
Storage Conditions: Store in cool, dry, tightly closed containers, avoid heat, sunlight, and sources of ignition, segregate from incompatible materials, label and date all containers for inventory traceability
Special Considerations: Control moisture and limit exposure to air to preserve chemical stability
Occupational Exposure Limits: No specific limits established, handle as potentially hazardous material
Engineering Controls: Fume hoods, eyewash stations, local exhaust ventilation
Personal Protective Equipment: Safety glasses with side shields, chemical-resistant gloves, lab coats, approved respirators in cases of dust production
Hygiene Measures: Wash hands thoroughly after handling, avoid eating or drinking in the laboratory, remove contaminated clothing after use
Appearance: Yellow to orange crystalline powder
Odor: Mild or odorless
Melting Point: 52–54°C
Boiling Point: Not available
Solubility: Poorly soluble in water, soluble in organic solvents such as ethanol, DMSO, dimethyl formamide
pH: Not applicable for a solid
Partition Coefficient (log P): 3.6
Vapor Pressure: Not determined
Flash Point: >150°C
Explosive Properties: Not expected, but fine dust may pose minimal risk of explosion on ignition
Chemical Stability: Stable under recommended storage conditions, degrades in strong light or heat
Conditions to Avoid: Heat, open flames, prolonged exposure to light, contact with strong acids or bases
Incompatible Materials: Oxidizing agents, strong acids and bases, reducing agents
Hazardous Decomposition Products: Carbon oxides, possible toxic quinones during thermal decomposition
Acute Toxicity: Estimated oral LD50 (rat) >500 mg/kg, limited absorption on skin, irritant to eyes and mucous membranes
Chronic Effects: No extensive long-term human data, animal studies show low potential for mutagenicity or carcinogenicity
Routes of Exposure: Inhalation, ingestion, skin or eye contact
Potential Health Risks: Irritation, dizziness, stomach upset in higher doses or improper handling, sensitization is uncommon but not impossible
Symptoms of Overexposure: Cough, skin redness, ocular discomfort, nausea or headache in sensitive individuals
Aquatic Toxicity: Not classified as highly toxic, but avoid direct releases to waterways or soil
Environmental Persistence: Not rapidly degradable, potential to bioaccumulate if large quantities contaminate waters
Other Adverse Effects: May affect aquatic organisms with excessive concentration, follow guidelines for pharmaceutical and laboratory waste streams
Waste Handling: Dispose in accordance with local, regional, and national regulations, destroy unused material through chemical waste incineration if permitted, do not pour solvents or powders down the drain
Contaminated Packaging: Rinse empty containers, manage as chemical waste
Precautions: Consult waste disposal contractors who understand regulations for organics and pharmaceutical residues
UN Number: Not regulated for most forms
Proper Shipping Name: Not dangerous goods under ADR, IATA, or IMDG codes
Packing Group: Not assigned
Transport Precautions: Keep away from sources of ignition, avoid rough handling, transport in secure, labeled containers to prevent leaks or spills, maintain documentation for transit checks
International Inventories: Listed on chemical databases in the US (TSCA), EU (EINECS/ELINCS), and Japan (ENCS)
US Regulations: Not regulated as hazardous under OSHA, not specifically listed under SARA Title III or CERCLA
European Union: Not classified under CLP for environmental hazards, subject to REACH registration for large volume use, maintain usage records for authorities
Other National Regulations: Research and cosmetics use governed under local occupational health codes, safety recommendations outlined by local competent authorities
Labeling Requirements: Name, hazard statement, pictogram for irritation, emergency contact for worker protection