Wusu, Tacheng Prefecture, Xinjiang, China admin@sinochem-nanjing.com 3389378665@qq.com
Follow us:



Ferrous Arsenate MSDS

Identification

Product Name: Ferrous Arsenate
Chemical Formula: Fe3(AsO4)2
Synonyms: Iron(II) arsenate
CAS Number: 10103-50-1
Recommended Use: Laboratory chemical, manufacturing
Manufacturer Contact: Details provided by supplier or on shipping documents

Hazard Identification

GHS Classification: Acute Toxicity Oral (Category 2), Acute Toxicity Dermal (Category 3), Specific Target Organ Toxicity - Repeated Exposure (Category 2), Aquatic Acute (Category 1), Aquatic Chronic (Category 1)
Signal Word: Danger
Hazard Statements: Fatal if swallowed, Toxic in contact with skin, Causes damage to organs through prolonged or repeated exposure, Very toxic to aquatic life with long lasting effects
Pictograms: Skull and crossbones, Exclamation mark, Health hazard, Environment
Precautionary Statements: Do not breathe dust or fumes, Wear protective gloves and clothing, Avoid release to environment, Wash hands after handling, Do not eat, drink, or smoke when using this product

Composition / Information on Ingredients

Chemical: Ferrous Arsenate
Concentration: 100%
CAS: 10103-50-1
Impurities/Additives: Not known to be present at concentrations that impact classification

First Aid Measures

Eye Contact: Immediately flush eyes with water for at least 15 minutes, lifting eyelids occasionally. Obtain medical attention without delay.
Skin Contact: Remove contaminated clothing, wash skin with soap and plenty of water. Seek medical help if irritation occurs or persists.
Ingestion: Rinse mouth, drink several glasses of water if conscious, do not induce vomiting. Get immediate medical assistance.
Inhalation: Move to fresh air, maintain breathing, give artificial respiration if breathing stops. Call a poison control center or doctor right away.
Most Important Symptoms: Nausea, vomiting, abdominal pain, diarrhea, confusion, muscle weakness, organ failure at high doses.
Advice for Medical Professionals: Treat symptomatically and supportively, monitor vital signs, consider chelation therapy for arsenic poisoning.

Fire-Fighting Measures

Suitable Extinguishing Media: Use dry chemical, carbon dioxide, foam, or water spray as appropriate for surrounding fire.
Specific Hazards: May emit toxic fumes of arsenic oxides and iron oxides under fire conditions.
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear.
Special Procedures: Avoid runoff to sewers or waterways, isolate hazard area, use water spray to cool containers exposed to fire.

Accidental Release Measures

Personal Protection: Evacuate unnecessary personnel, ventilate area, wear full protective clothing including gloves, goggles, and respirator.
Spill Clean-up: Avoid dust formation, sweep up and place in suitable closed containers for disposal. Prevent spillage from entering drains or water sources.
Environmental Precautions: Highly toxic to aquatic organisms. Notify authorities if product enters waterway.
Decontamination: Wash contaminated surfaces with plenty of water, collect waste water for proper disposal.

Handling and Storage

Safe Handling: Handle in a chemical fume hood whenever possible. Avoid generating dust, avoid all unprotected contact, ensure good ventilation.
Storage Conditions: Store in tightly closed, labeled containers in a cool, dry, well-ventilated area, away from incompatible substances including strong acids and bases.
Incompatibilities: Avoid contact with strong oxidizers, reducing agents, acids.
Hygiene Measures: Wash hands and face thoroughly after handling, remove contaminated clothing before entering eating areas.

Exposure Controls and Personal Protection

Exposure Limits (OSHA/NIOSH): Arsenic compounds (as As): TWA 0.01 mg/m3 (OSHA, NIOSH); Iron compounds: no specific standard
Engineering Controls: Use only with adequate ventilation, local exhaust to control airborne concentrations.
Personal Protective Equipment: Wear chemical-resistant gloves, safety goggles, impervious clothing, suitable respiratory protection in case of insufficient ventilation.
Environmental Controls: Implement measures to prevent exposure to surrounding environment, use closed systems as much as possible.

Physical and Chemical Properties

Appearance: Pale green or grayish powder
Odor: Odorless
Odor Threshold: Not applicable
pH: Not determined
Melting Point/Freezing Point: Not determined
Boiling Point: Decomposes before boiling
Flash Point: Not applicable
Evaporation Rate: Not applicable
Flammability: Not flammable
Vapor Pressure: Not relevant
Density: Not determined
Solubility in Water: Insoluble
Partition Coefficient (n-octanol/water): Not determined
Auto-Ignition Temperature: Not applicable
Decomposition Temperature: Decomposes on heating
Viscosity: Not applicable

Stability and Reactivity

Chemical Stability: Stable under recommended storage conditions
Hazardous Reactions: Reacts with strong acids to produce toxic arsenic compounds
Conditions to Avoid: High humidity, moisture, extreme temperatures
Incompatible Materials: Strong oxidizing agents, acids, reducing agents
Decomposition Products: On heating releases toxic arsenic oxides, iron oxides

Toxicological Information

Acute Toxicity: Extremely toxic if ingested or absorbed through skin; even small amounts may cause systemic poisoning
Routes of Exposure: Inhalation, dermal, oral
Symptoms: Dizziness, abdominal pain, vomiting, diarrhea, confusion, organ failure, potentially fatal
Chronic Effects: Prolonged or repeated exposure may cause skin lesions, peripheral neuropathy, gastrointestinal disturbances, damage to liver, kidney, and cardiovascular system
Carcinogenicity: Arsenic compounds are classified as human carcinogens by IARC and NTP
Mutagenicity: Evidence of mutagenic potential
Reproductive Toxicity: Animal studies link exposure to developmental toxicity

Ecological Information

Toxicity to Aquatic Life: Extremely hazardous, causes immediate and long-term damage to aquatic organisms
Persistence and Degradability: Persists in soil and sediments; does not readily degrade
Bioaccumulation Potential: Strong potential for bioaccumulation in aquatic and terrestrial organisms
Mobility in Soil: Low; remains bound to soil but can leach under certain conditions
Other Adverse Effects: Disrupts ecosystems, contaminates food chains

Disposal Considerations

Waste Treatment Methods: Dispose of as hazardous waste in accordance with local, regional, or national regulations
Contaminated Packaging: Treat containers as hazardous; empty thoroughly before disposal, do not reuse
Special Precautions: Do not discharge into environment, ensure waste is handled by authorized agencies
Reference: Consult local waste authority and US EPA or relevant protection agency guidelines

Transport Information

UN Number: UN 1557
UN Proper Shipping Name: Arsenic compound, inorganic, solid, n.o.s. (includes Ferrous Arsenate)
Transport Hazard Classes: 6.1 (Toxic substances)
Packing Group: II
Environmental Hazards: Marine pollutant
Special Precautions: Follow applicable transport regulations, use secure, labeled containers, avoid breakage

Regulatory Information

OSHA: Regulated hazardous substance
EPA: Listed hazardous waste (RCRA), Reportable Quantity (RQ) for arsenic compounds
SARA: Section 302 (Extremely Hazardous), Section 313 (Toxic Chemical), Section 304 (Reportable Spill Quantity)
TSCA: Listed on Inventory
Other State Regulations: Known to California to cause cancer and reproductive toxicity (Proposition 65)
International Regulations: Subject to export controls and restrictions; consult regional lists for compliance