© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Chemical Name: Chromium Trifluoroacetate
Chemical Formula: C6F9CrO6
Common Uses: Laboratory reagent, catalyst in organic and inorganic synthesis
Physical Appearance: Usually encountered as a green crystalline solid
Odor: Slight chemical odor, not overpowering
Primary Dangers: Corrosive to eyes and skin, toxic if inhaled or ingested
Potential Health Effects: Can cause respiratory tract irritation, skin burns, eye damage, and possible systemic toxicity after significant exposure
Environmental Impact: May cause harm to aquatic environments, should not be flushed into waterways
Target Organs: Lungs, kidneys, liver, eyes, skin
Hazard Symbols: Corrosive, toxic
Main Component: Chromium(III) trifluoroacetate compound
Metal Content: Contains chromium in the +3 oxidation state
Other Elements: Fluorinated acetic acid residues (trifluoroacetate anions)
Percentage Purity: Typically above 95% in research-grade samples
Inhalation: Remove from exposure to fresh air immediately, monitor for breathing difficulty and seek prompt medical help if respiratory symptoms occur
Skin Contact: Wash thoroughly with soap and water, remove contaminated clothing, treat visible burns, and get medical evaluation
Eye Contact: Immediately rinse eyes with plenty of water for several minutes, lifting eyelids thoroughly, and get medical attention as soon as possible
Ingestion: Do not induce vomiting, rinse mouth with water, seek urgent medical assistance
Flammability: Not a direct fire hazard but may emit toxic fumes under fire conditions
Combustion Products: Toxic gases such as hydrogen fluoride, chromium oxides, and other fluorinated compounds
Suitable Extinguishing Media: Use water spray, foam, dry chemical, or carbon dioxide for surrounding fire
Fire Response Precautions: Firefighters should use full protective gear and self-contained breathing apparatus for fume protection
Spill Handling: Wear chemical-resistant gloves and eye protection before cleanup
Containment: Avoid raising dust, ventilate area well, isolate spill from drains and sewers
Cleanup Procedures: Scoop up solid material with non-sparking tools, place in a suitable chemical waste container, and label for hazardous disposal
Avoidance: Minimize contact and inhalation risks throughout the process
Safe Handling: Always work in a properly ventilated lab, avoid direct skin and eye contact, do not breathe in dust, and handle only with PPE
Storage Recommendations: Keep container tightly closed, store in a cool and dry location, keep away from incompatible acids or base-sensitive substances, avoid storing with food or drink
Labelling: Ensure clear hazard warnings are visible on all containers
Engineering Controls: Use fume hoods, localized exhaust ventilation as standard practice
Personal Protection Equipment: Wear chemical splash goggles, gloves resistant to chemicals, lab coat
Respiratory Protection: Use an approved respirator in situations where airborne exposure is possible
Hygiene: Always wash hands and forearms after handling, never eat or touch face while using product
Appearance: Green crystalline solid
Odor: Faint, somewhat sharp chemical scent
Melting Point: Decomposes at elevated temperature, does not melt cleanly
Solubility: Soluble in polar solvents, particularly water and alcohols
Vapor Pressure: Minimal at standard temperatures
Reactivity: Can react with strong acids and bases, releases toxic gases on decomposition
Thermal Stability: Stable under normal usage conditions but decomposes with heat
Incompatibilities: Strong acids, strong bases, strong oxidizing agents, reducing agents
Hazardous Decomposition: Toxic gases including hydrogen fluoride, fluorinated organic compounds, chromium oxides released at high temperature
Polymerization: Not known to occur
Routes of Exposure: Inhalation, skin and eye contact, ingestion
Symptoms of Overexposure: Irritation of mucous membranes, skin burns, respiratory difficulty, gastrointestinal upset
Chronic Exposure Risks: Prolonged or repeated exposure may damage organs such as liver and kidneys
Special Populations: Extra caution for individuals with respiratory or skin sensitivity
Aquatic Toxicity: Chromium compounds can harm aquatic life, persistent in water systems
Soil Mobility: Moderate, risk of leaching to groundwater
Degradation: Not readily biodegradable
Bioaccumulation Risk: Tendency to accumulate in certain organisms; dispose responsibly
Preferred Disposal Method: Treat as hazardous waste and hand over to authorized waste disposal contractors
Precautions: Never pour down the drain, avoid releasing to the natural environment or landfill
Labeling: Clearly mark waste containers for specialized handling
Shipping Classification: Treat as hazardous material for ground and air transport
Packing Requirements: Use robust, leak-proof containers, secure packaging to avoid accidental release
Transport Precautions: Keep away from incompatible materials, prevent spillage, and clearly label throughout the journey
Transport Modes: Only ship through authorized carriers experienced with laboratory chemicals
Applicable Regulations: Covered by chemical safety legislation in most countries, regulated for workplace exposure and environmental release
Occupational Exposure Limits: Chromium compounds generally subject to workplace exposure limits where enforced
Labelling Laws: Label as corrosive/toxic; follow local and international standards
Environmental Reporting: Required reporting if significant quantities are released outside controlled facilities
