© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: Aniline Acetate
Chemical Name: Aniline acetate
Synonyms: Acetic acid anilide
Chemical Formula: C8H9NO2
CAS Number: 628-46-6
Recommended Use: Laboratory reagent, chemical analysis, synthesis of dyes
Manufacturer Details: Contact local supplier or chemical distributor for source information
Emergency Contact Number: Access Poison Control or chemical incident hotlines listed on shipment container
Signal Word: Warning
Hazard Statements: Harmful if swallowed, causes skin irritation, causes serious eye irritation, may cause respiratory irritation
GHS Classification: Acute toxicity – Oral (Category 4), Skin Irritation (Category 2), Eye Irritation (Category 2A), Specific Target Organ Toxicity – Single Exposure (Category 3)
Pictograms: Exclamation mark
Precautionary Statements: Avoid breathing dust/fume/gas/mist/vapors/spray, wash hands thoroughly after handling, wear protective gloves, eye protection, face protection, call a poison center in case of significant exposure
Potential Health Effects: Inhalation leads to respiratory tract discomfort, skin contact can leave redness and soreness, eye contact causes stinging or watering, ingestion brings nausea, headache, possibly serious poisoning
Chemical Composition: Single substance
Aniline Acetate: >98% by weight
Impurities: Less than 2% (often unlisted, consult product label)
Additives: No additives reported
Mixture: Not a mixture, pure compound for chemical use
Inhalation: Remove individual to fresh air, keep comfortable and at rest, seek medical advice if symptoms like coughing or shortness of breath persist
Skin Contact: Take off contaminated clothing, wash skin with soap and plenty of water, do not rub affected area, get medical attention if irritation persists
Eye Contact: Rinse thoroughly with plenty of water, lift eyelids, continue washing for at least 15 minutes, remove contact lenses if present and easy to do, seek immediate medical care
Ingestion: Rinse mouth, do not give anything by mouth to an unconscious person, do not induce vomiting, seek medical attention promptly
Most Important Symptoms/Effects: Red or irritated eyes, sore throat, headache, drowsiness, shortness of breath, possibly cyanosis (bluish color to skin or lips in severe cases)
Suitable Extinguishing Media: Dry chemical, carbon dioxide, water spray, foam
Special Hazards: Burning releases toxic fumes of nitrogen oxides, carbon oxides
Firefighter Protection: Wear approved self-contained breathing apparatus and chemical-resistant turnout gear
Hazardous Combustion Products: Nitrogen oxides, carbon monoxide, carbon dioxide, possibly other unidentified toxic gases
Personal Precautions: Put on gloves, goggles, and a lab coat or chemical-resistant apron, ensure good ventilation, avoid breathing dust or vapors
Environmental Precautions: Keep out of drains, surface water, and soil, contain spill with non-combustible absorbents such as sand or vermiculite
Cleanup Methods: Scoop up with non-sparking tools, place in a labeled, sealable container, clean area with plenty of water, ventilate area after containment
Disposal: See disposal section for hazardous waste handling
Handling: Use in a chemical fume hood, avoid dust generation, do not breathe vapors or dust, wear appropriate chemical-resistant gloves, goggles, use appropriate transfer tools
Storage Conditions: Store in a tightly closed container, keep in a well-ventilated, dry, cool place, shield from direct sunlight and incompatible materials such as oxidizers, acids, strong bases
Container Requirements: Use glass or chemical-resistant plastics, keep upright and avoid impacts, store away from food and drink
Incompatibilities: Keep separate from oxidizing agents, acids, and alkalis
Occupational Exposure Limits: No established OSHA, ACGIH, or NIOSH exposure limits for aniline acetate
Engineering Controls: Work in chemical fume hood or area with effective local ventilation
Personal Protective Equipment (PPE): Chemical-resistant gloves (nitrile, neoprene), safety goggles or face shield, lab coat with long sleeves, respiratory protection if dust or vapors become excessive, use specific workplace respirator safety guidelines
Hygiene Practices: Wash hands and forearms thoroughly after handling, do not eat, drink, or smoke in work area, rinse PPE after use, store away from children and unauthorized personnel
Appearance: Colorless or pale yellow crystalline solid or powder
Odor: Slightly sweet or faint aromatic
Molecular Weight: 151.16 g/mol
Melting Point: 110–113°C (230–235°F)
Boiling Point: Decomposes before boiling
Solubility: Soluble in water, ethanol, and ether
Density: Approximately 1.18 g/cm³
pH: Not applicable for solid; slightly acidic in solution
Flash Point: Not available
Partition Coefficient: log Kow not available
Chemical Stability: Stable under normal temperatures and pressures
Possible Hazardous Reactions: May react with strong oxidizing agents, acids, and alkalis
Conditions to Avoid: Exposure to moisture, prolonged heating, and incompatible chemicals
Hazardous Decomposition Products: Nitrogen oxides, carbon monoxide, carbon dioxide
Polymerization: Not expected under recommended storage and handling conditions
Routes of Exposure: Inhalation, ingestion, skin, and eye contact
Acute Effects: Irritation to eyes, skin, respiratory tract, digestive tract
Chronic Effects: Prolonged exposure can affect liver, kidney, and blood (methemoglobinemia), overexposure might cause headache, dizziness, convulsions, cyanosis
LD50 (Oral, rat): Not precisely reported for acetate, aniline base around 250–500 mg/kg
Carcinogenicity: No classification from IARC, NTP, or OSHA as carcinogenic
Mutagenicity/Reproductive Toxicity: No specific data; analogs (anilines) have shown potential for reproductive system effects with chronic exposure, always minimize exposure and practice proper safety
Aquatic Toxicity: Expected harmful to aquatic organisms, avoid as runoff or waste
Persistence and Degradability: May degrade in presence of sunlight and bacterial action but not considered readily biodegradable
Bioaccumulative Potential: Estimated low, limited data for the acetate salt
Mobility in Soil: Moderate, soluble; can leach into soil and groundwater streams, especially near chemical disposal sites
Other Adverse Effects: Careless handling impacts local aquatic life; lowering oxygen environments due to oxidation of breakdown products
Disposal Methods: Collect in a tightly sealed chemical waste container, label and store for hazardous waste pickup
Recommended Disposal: Incinerate under controlled conditions in accordance with federal, state, or local environmental regulations
Special Instructions: Do not flush to drains, land, or regular trash, do not re-use empty containers, handle residues as chemical waste
Regulatory Waste Codes: Consult EPA or local waste authority
UN Number: Not assigned specifically for aniline acetate; check shipment-specific data
UN Proper Shipping Name: Not regulated internationally as hazardous
Transport Hazard Class: Not classified
Packing Group: Not assigned
Special Precautions: Package to prevent leaks, avoid accidental mixing with other reactive chemicals, confirm labeling on all packages before shipment
US Regulations: Not specifically listed under SARA, CERCLA, or RCRA, but all anilines considered hazardous; report unintentional releases to proper authorities
TSCA: Listed on inventory
EU Regulations: Complies with REACH as an industrial chemical; safety and exposure limited depending on use
Canada: DSL/NDSL listed
Labeling Requirements: Follow GHS/OSHA and local chemical labeling laws with hazard pictograms, warning signs, emergency contact information
Worker Training: All users should undergo chemical safety training for hazardous substances
