© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: Aluminum Resinate
Chemical Family: Metal Soaps
Molecular Formula: Variable, typically C₁₈H₃₅AlO₂
Manufacturing Uses: Paints, varnishes, inks, coatings
Distributor: Industrial chemical suppliers
Emergency Number: Local Poison Control Center or National Emergency Hotlines
Recommended Use: Drier and waterproofing agent in paint and ink industries
Synonyms: Aluminum soap of rosin, Aluminum resin soap
CAS Number: 9007-41-4
Contact Email: Provided by manufacturer
Physical State: Solid, waxy flakes or powder
Color: Pale yellow to amber
Odor: Slight resinous
Key Hazards: Irritant to skin, eyes, respiratory tract
Acute Symptoms: Coughing, sneezing, skin redness, eye watering
Chronic Exposure: Dermatitis, lung irritation
GHS Classification: Eye irritation (Category 2A), Skin irritation (Category 2)
Signal Word: Warning
Warning: Prolonged or repeated exposure increases risk of sensitization
Pictograms: Exclamation mark
Active Ingredient: Aluminum Resinate
Chemical Composition: Resinic acids (primarily abietic acid) and aluminum salts
Purity: 75-90% (may vary by manufacturer specification)
Impurities: Trace fatty acids, unreacted rosin, solvent residue
Aluminum Content: Up to 5% by weight
Formulators: May incorporate stabilizers or inhibitors in trace amounts
Inhalation: Move affected person to fresh air, allow them to breathe comfortably, seek medical advice if symptoms persist
Eye Contact: Rinse eyes with gentle stream of clean water for at least 15 minutes, hold eyelids apart, consult doctor for ongoing irritation
Skin Contact: Remove contaminated clothing, wash affected area thoroughly with soap and water
Ingestion: Rinse mouth with water, do not induce vomiting, get medical attention if large amounts swallowed
General Advice: Always seek professional evaluation for persistent or severe symptoms
Suitable Extinguishing Media: Dry chemical, CO₂, foam, water spray
Unsuitable Media: High-pressure water jets (risk of chemical splatter)
Combustion Hazards: Toxic fumes (carbon monoxide, carbon dioxide, aluminum oxides, organic vapors)
Special Protective Equipment: Firefighters require full-face self-contained breathing apparatus and chemical protective clothing
Firefighting Techniques: Cool containers with water spray, avoid direct contact with runoff
Explosion Risk: Not classified as explosive, but dust clouds can ignite
Personal Precautions: Wear gloves, goggles, chemical resistant clothing, ensure good ventilation
Environmental Precautions: Prevent spillage from reaching drains, soil, surface waters
Cleanup Methods: Sweep or vacuum up material, avoid generation of dust, collect in labeled containers for disposal
Decontamination: Wash spill site with water and mild detergent
Disposal of Waste: Use licensed waste contractor, comply with local regulation
Notification: Inform emergency responders if a large or hazardous spill occurs
Safe Handling: Use in well-ventilated areas, minimize dust, avoid direct skin and eye contact, wear PPE
Storage Conditions: Store in sealed, labeled drums or containers, keep cool and dry, away from heat, open flames, moisture
Incompatibilities: Avoid storage with strong acids, oxidizing agents, moisture-sensitive materials
Separation: Store away from food, beverages, animal feed
Storage Temperature: Control between 5°C and 25°C for maximum stability
Other Advice: Ensure containers remain tightly closed, rotate stock to keep product fresh
Exposure Limits: No specific OSHA PEL or ACGIH TLV established for aluminum resinate, but general dust limits apply
Engineering Controls: Use local exhaust ventilation systems, work in fume hoods or extraction booths if possible
Respiratory Protection: NIOSH-approved dust masks or respirators for dusty operations
Skin Protection: Nitrile gloves, long-sleeved chemical-resistant clothing
Eye Protection: Safety goggles or face shields
Hygiene Practices: Wash hands before eating, drinking, or smoking; remove contaminated clothing before breaks
Physical State: Opaque, hard waxy solid, flakes, or powder
Color: Pale yellow to brown
Odor: Mild resin scent
Odor Threshold: Not determined
pH (in water): Slightly acidic to neutral
Melting Point: 90–110°C
Boiling Point: Decomposes before boiling
Solubility: Insoluble in water, soluble in organic solvents like turpentine, mineral spirits
Vapor Pressure: Negligible
Density: 1.05–1.15 g/cm³
Partition Coefficient: Not available
Flash Point: Typically above 200°C (closed cup)
Autoignition Temperature: Data not available
Chemical Stability: Stable under normal storage and handling conditions
Hazardous Reactions: Possible reaction with acids causes release of resin acids and aluminum salts
Decomposition Products: Fumes of carbon monoxide, carbon dioxide, irritating organic vapors
Polymerization: Product does not polymerize spontaneously
Reactive Incompatibilities: Strong acids, strong oxidants, moisture excess
Corrosivity: Not corrosive to common metals or containers under controlled storage
Routes of Exposure: Inhalation, ingestion, skin or eye contact
Acute Toxicity: Low by oral route, higher hazard from fine dust inhalation or skin absorption
Skin Effects: Prolonged contact may cause dry skin, dermatitis
Eye Effects: Can cause watering, irritation, temporary blurred vision
Respiratory Effects: Dust can trigger coughing, discomfort, potential allergic response
Carcinogenicity: Not listed as a known or probable carcinogen
Chronic Effects: Sensitization, worsening of pre-existing pulmonary or dermatological conditions
Mutagenicity/Reproductive Toxicity: No significant evidence recorded
Environmental Impact: Poorly biodegradable in soil or water, potential bioaccumulation risk
Aquatic Toxicity: Harmful to aquatic life if released in large quantities
Mobility: Low solubility limits migration in environment
Persistence: Component resins break down slowly, aluminum salts stable over time
Long-Term Risks: Risk of physical coating of plant leaves or aquatic animals
Wastewater Treatment: May require filtration and separation before discharge to sewer systems
Waste Generation: Collect product residues and contaminated packaging for proper disposal
Disposal Method: Incinerate or landfill through approved hazardous waste services
Container Disposal: Triple rinse, then puncture and send to recycling or waste facility
Legal Compliance: Observe all local, state, and federal requirements for disposal
Waste Codes: Follow industry and governmental recommendations for classification
UN Number: Not regulated by most transportation authorities
Shipping Name: Aluminum resinate
Transport Hazard Class: Not classified as hazardous
Packing Group: Not regulated
Labels Required: No special labeling required
Bulk Transport: Use sealed, labeled drums or bags, avoid stacking to risk of container collapse
Special Precautions: Protect from moisture, excessive heat, and physical damage in transit
Spill Response in Transit: Use absorbent material, notify responsible parties
TSCA Status: Listed on US Toxic Substances Control Act inventory
EINECS/ELINCS: Registered under European chemical management systems
OSHA Considerations: Subject to Hazard Communication Standard
SARA Title III: Not an Extremely Hazardous Substance, no Section 313 reporting required
California Proposition 65: Product not listed
WHMIS Classification (Canada): D2B (Toxic Material Causing Other Toxic Effects)
REACH Compliance: Components pre-registered or registered where required
Other National Regulations: Follow jurisdictional safety data mandates for labeling, training, safe handling
