© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: 7-Pime
Synonyms: Heptapime
Chemical Family: Beta-lactam antibiotic derivative
Recommended Use: Research and laboratory settings
Supplier: [Supplier Name]
Emergency Contact: [Phone Number]
CAS Number: 54000-XX-X
UN Number: UN-Number: 3245
Product Code: 7PIM-XX2024
Hazard Classification: Acute Toxicity (Oral), Eye Irritation, Skin Sensitizer
Signal Word: Danger
Hazard Pictograms: Exclamation mark
Hazard Statements: May cause allergic skin reaction. Harmful if swallowed. Causes serious eye irritation. May cause respiratory irritation.
Precautionary Statements: Avoid breathing dust. Wash hands thoroughly after handling. Wear protective gloves, clothing, and eye protection. Use in well-ventilated area.
Routes of Exposure: Inhalation, skin contact, ingestion, eye contact
Chemical Name: 7-Pime
Common Name: Heptapime
Concentration: ≥ 98% (analytical grade)
Impurities: Beta-lactam-related compounds < 2%
Molecular Formula: C19H24N6O5S2
Molecular Weight: 484.56 g/mol
General Advice: Remove affected individual from exposure and seek immediate medical attention.
Inhalation: Move to fresh air. If breathing is difficult, provide oxygen. Seek medical attention.
Skin Contact: Remove contaminated clothing. Wash affected skin with plenty of soap and water for at least 15 minutes.
Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present. Seek medical care if irritation persists.
Ingestion: Rinse mouth thoroughly with water. Do not induce vomiting unless instructed by medical personnel.
Suitable Extinguishing Media: Water spray, dry chemical, CO2, foam
Specific Hazards: Emits toxic fumes of nitrogen oxides, sulfur oxides, and carbon monoxide under fire conditions.
Protective Equipment: Firefighters should wear self-contained breathing apparatus and full protective gear.
Special Precautions: Avoid runoff from fire control as it may cause environmental pollution.
Explosion Hazards: Dust may form explosive mixtures with air; prevent dust drag from reaching ignition sources
Personal Protection: Utilize appropriate PPE including gloves, goggles, and respirator.
Spills or Leaks: Avoid generating dust; scoop up material and transfer to a secure, labeled container.
Containment: Prevent from entering drains or water sources.
Cleanup Methods: Wet wiping or HEPA vacuum ensures airborne dust is minimized
Decontamination: Wash area with soapy water after cleanup; ventilate area well.
Precautions for Safe Handling: Handle in ventilated area. Avoid contact with skin, eyes, and clothing. Use personal protective equipment.
Safe Storage Conditions: Store in tightly closed container, out of direct sunlight, in a dry, cool, and well-ventilated place.
Incompatible Materials: Strong oxidizing agents, acids, and alkalis.
Storage Temperature: 2-8°C (refrigerated)
Special Instructions: Segregate from food and animal feed products.
Occupational Exposure Limits: Not established; minimize exposure as much as possible.
Engineering Controls: Use fume hood or local exhaust ventilation to maintain low airborne concentrations.
Eye Protection: Chemical safety goggles.
Skin Protection: Impervious gloves, lab coat, long pants.
Respiratory Protection: Use approved respirator in situations of dust formation.
Hygiene Measures: Wash thoroughly after handling and before eating or drinking.
Appearance: White-to-off-white powder
Odor: Characteristic faint chemical odor
pH: 4.5-6.5 (1% aqueous solution)
Solubility: Freely soluble in water, practically insoluble in organic solvents
Melting Point: 188–192°C (decomposes)
Boiling Point: Not applicable (decomposes before boiling)
Partition Coefficient (LogP): -2.4
Vapor Pressure: Not applicable
Flash Point: Not determined
Chemical Stability: Stable under recommended storage conditions.
Reactivity: Reacts with strong bases, acids, oxidizers; decomposes releasing toxic gases
Hazardous Decomposition Products: Nitrogen oxides, sulfur oxides, carbon monoxide, carbon dioxide
Polymerization: Will not occur
Acute Toxicity Data: LD50 (oral, rat): >2000 mg/kg
Routes of Exposure: Inhalation, dermal, oral, ocular
Symptoms: Skin and eye irritation, allergic reaction, respiratory discomfort
Chronic Effects: Sensitization after repeated contact. No data on carcinogenicity or reproductive toxicity.
Medical Conditions Aggravated: Asthma, skin allergies, compromised respiratory function
Ecotoxicity: Toxic to aquatic life; avoid environmental release
Persistence and Degradability: Not readily biodegradable
Bioaccumulation Potential: Low based on logP
Mobility in Soil: Expected to have limited mobility due to high water solubility and low partition coefficient
Other Environmental Hazards: Antibiotic activity may disrupt microbial ecology if released
Waste Disposal Methods: Dispose of as hazardous chemical waste; do not release into sewers or waterways.
Container Disposal: Rinse empty containers three times, then dispose in accordance with local and national legislation.
Special Precautions: Avoid inhalation and direct contact with residue. Incineration is preferred for destruction.
Regulatory References: Consult local, state, and national laws for proper disposal practices
UN Number: 3245
Proper Shipping Name: Environmentally Hazardous Substance, Solid, N.O.S. (contains 7-Pime)
Transport Hazard Class: 9 (Miscellaneous dangerous substances and articles)
Packing Group: III
Label Requirements: Miscellaneous dangerous goods
Special Transport Precautions: Prevent package rupture, keep dry and away from incompatible substances.
GHS Classification: Included for acute toxicity, eye and skin irritation
TSCA Status: Not listed
REACH Status: Not registered in the EU Chemical Inventory
OSHA: Not classified as hazardous under OSHA regulation
WHMIS: Classified D2B - Toxic material causing other toxic effects
Other Regional Regulations: Check regional requirements for storage, handling, and transport.
SARA 313: Not listed
California Prop 65: Not listed
Chemical Inventories: Not found on AICS, DSL, ENCS, IECSC, or PICCS
