© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Chemical Name: 3-[(3-Biphenyl-4-Yl)-1,2,3,4-Tetrahydro-1-Naphthyl]-4-Hydroxycoumarin
Molecular Formula: C30H23O3
Common Uses: Research labs may study this compound for its unique structure that can inspire new pharmaceuticals and advanced materials research.
Appearance: Powdered solid with light yellow to beige tint, fine particulate
Odor: Faint, non-distinct
Health Risks: Skin and respiratory irritation emerges as the most common issue during handling, especially without strong ventilation. Prolonged exposure to eyes or mucus membranes can cause redness or discomfort. Oral ingestion or extended skin contact often raises concerns for liver stress, given the coumarin backbone known from other substances.
Fire Risk: This compound can burn under intense heat, so storage near ignition sources draws attention. Its powdery nature leaves open the possibility for tiny airborne particles which, if confined and ignited, could contribute to a localized dust explosion.
Environmental Toxicity: Impact isn’t thoroughly catalogued, but similar aromatic compounds can threaten aquatic environments.
Main Ingredient: 3-[(3-Biphenyl-4-Yl)-1,2,3,4-Tetrahydro-1-Naphthyl]-4-Hydroxycoumarin makes up pure samples. I’ve seen in labs that sometimes trace solvents like ethanol remain from synthesis, though purification steps usually drop impurities below significant levels.
Physical State: Single organic molecule, not a mixture or blend.
Skin Contact: Washing immediately with warm running water can limit absorption. A thick layer of chemical on skin brings more risk, so removal of contaminated clothing jumps high on the priority list.
Eye Contact: Direct contact with eyes demands a steady stream of water for at least fifteen minutes, a move that can greatly limit irritation.
Inhalation: If fumes or dust are inhaled, stepping away from the exposure zone followed by breathing fresh air often helps. Shortness of breath or dizziness encourages a trip to a healthcare clinic.
Ingestion: Swallowing often sends people rushing for water to drink, diluting the chemical, though further medical evaluation may be needed for more than minor exposure.
Suitable Extinguishing Media: Dry chemical, carbon dioxide, or foam work best. Direct water spray can scatter the powder, so gentle tactics prevail.
Protective Equipment: Firefighters suit up with respiratory gear if smoke clouds develop, since burning aromatic materials often throws off irritant gases.
Special Hazards: Aromatic hydrocarbons often create hazardous decomposition products under fire, like carbon monoxide, carbon dioxide, and smaller aromatic fragments.
Personal Precautions: Gloves and dust masks keep exposure risk low. Spilled powder gets slippery fast, so slipping protection around the workspace supports a safer environment.
Spill Clean-Up: Using a vacuum with a HEPA filter or wet-wiping confers a safer outcome than sweeping dry, which raises dust clouds.
Environment: Sealing off drains prevents run-off into groundwater—smart lab management never lets a spill hit open plumbing unintentionally.
Handling Practices: Handling inside a fume hood helps prevent inhalation of dust. Little details like gently opening bottles and avoiding wide, sudden movements keep powder from going airborne.
Safe Storage: Keeping the container cool, dry, and tightly closed matters; high humidity or heat can cause caking or breakdown. Separation from oxidizers and open flames stands out as standard advice for organic solids.
Engineering Controls: Localized exhaust ventilation, worked into most chemical hoods, drops exposure risk tremendously in confined areas.
Personal Protective Equipment: Gloves made of nitrile or similar materials, goggles or wrap-around safety glasses, and lab coats shield skin and eyes.
Hygiene Measures: Thorough hand washing after use, not eating in the lab, and changing out of work gear before leaving protect both the user and others who share common spaces.
Appearance: Pale to light yellow crystalline powder, tactile feel often described as fine-grained or silky
Odor: Mild, not pungent or fragrant
Melting Point: Typically falls in a high range, like many polycyclic aromatics
Solubility: Soluble in polar organic solvents such as dimethyl sulfoxide (DMSO) and some alcohols; not soluble in water
Vapor Pressure: Low, not appreciable at room conditions
Chemical Stability: Remains stable at room temperature out of sunlight. Extended UV light or strong acids can start to break down the structure.
Reactivity: Avoid mixing with strong acids, bases, or potent oxidizers. Heat and light can also become triggers for slow decomposition.
Acute Toxicity: Direct ingestion might prompt nausea or vomiting; aromatic coumarins have shown mild liver toxicity in some tests with rodents.
Chronic Exposure: Long-term contact with aromatic hydrocarbons may increase benchmarking for liver enzymes; such health markers signal a need for regular medical review for at-risk workers.
Skin and Eye Effects: May cause irritation, demonstrated in related chemical families.
Aquatic Toxicity: Like many aromatic compounds, breakdown in soil and water goes slowly. Certain fish and aquatic plants show sensitivity to polyaromatic hydrocarbons, meaning spills have potential environmental reach.
Bioaccumulation Potential: large, hydrophobic molecules such as this can lodge in fatty tissues, so risk climbs with chronic environmental leaks.
Soil Mobility: Binds strongly to organic matter in soil, limiting rapid migration into water bodies.
Preferred Disposal: Sending to licensed chemical waste handlers fits best, not general trash.
Incineration: Proper hazardous waste incinerators running at high temperature handle aromatic residues safely; burning in open air throws off toxic smoke.
Container Management: Rinsing containers with compatible solvent, collecting rinse for waste disposal too, keeps small spills from entering the sink.
Packaging Requirements: Leak-proof, impact-resistant containers made from compatible plastics work best.
Spill Response: Quick containment, strong tracking of lost product, and easy access to safety gear for transporters make the journey safer.
Transport Hazards: Solid, low vapor pressure minimizes airborne spread, but shaking or breaking containers can raise dust levels inside sealed shipping boxes.
Workplace Monitoring: Routine environmental and personal monitoring helps spot overexposures.
Hazard Communication: Clear hazard labels and up-to-date training turn out to be the best guard against workplace confusion and accidents with aromatics like this.
Regulations: Many jurisdictions fold similar coumarin derivatives into broader control lists for laboratory chemicals; direct listing not always present, yet local oversight agencies review handling and disposal plans with high scrutiny.
