© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: 2,5-Diethoxy-4-Morpholinodiazonium Tetrafluoroborate
Other Names: Diazonium salt, Mor-Diazonium, DE-Morpholidiazonium
Product Use: Synthetic intermediate for dyes, pharmaceuticals, organic chemistry research
Manufacturer: Relevant chemical supplier information on container or shipping paperwork
Emergency Numbers: Refer to national poison control or chemical safety hotline—often listed on product label
Recommended Restrictions: Laboratory research and industrial processes only; not for food, drug, or household use
Classification: Oxidizing solid, Acute toxicity (oral and inhalation), Skin irritation, Eye irritation, Sensitization hazard
Signal Word: Danger
Hazard Statements: Harmful if swallowed or inhaled; causes skin and serious eye irritation; poses a risk of allergic skin reaction; can decompose violently on contact with incompatible materials
Pictograms: Skull and crossbones, Exclamation mark, Flame over circle
Precautionary Statements: Avoid breathing dust or vapors; wash hands thoroughly after handling; use protective clothing and gloves; avoid contact with eyes, skin, and clothing
Chemical Name: 2,5-Diethoxy-4-Morpholinodiazonium Tetrafluoroborate
Chemical Formula: C10H18BF4N3O3
CAS Number: Provided by manufacturer or chemical database
Concentration: 100% (for pure substance)
Impurities: Traces of unreacted precursors, solvents, and decomposition byproducts
Stabilizers: Often stabilized with bulk inert salt, per supplier guidelines
Inhalation: Move to fresh air rapidly; administer oxygen if breathing is difficult; seek immediate medical attention
Skin Contact: Remove contaminated clothing; flush skin with running water for at least 20 minutes; call a physician if irritation persists
Eye Contact: Rinse eyes with water for at least 15 minutes, lifting eyelids occasionally; seek emergency medical care quickly
Ingestion: DO NOT induce vomiting; rinse mouth with plenty of water if conscious; take to emergency room with product packaging
Most Important Symptoms: Respiratory distress, mucous membrane irritation, severe skin burn, redness, blistering, possible allergic response
Suitable Extinguishing Media: Dry chemical powder, foam, or carbon dioxide; avoid water streams as product may decompose violently
Specific Hazards: May emit toxic fumes of nitrogen oxides, boron compounds, hydrogen fluoride under fire conditions
Firefighting Procedures: Wear self-contained breathing apparatus and full protective gear; evacuate unnecessary personnel
Explosion Risk: Vigorous decomposition if heated or mechanically shocked, especially when mixed with peroxides or reducing agents
Advice for Firefighters: Approach upwind; use water spray to cool unopened containers far from the fire zone
Hazardous Combustion Products: Hydrogen fluoride, nitrogen oxides, boron trifluoride gas
Personal Precautions: Evacuate area, ventilate location, avoid dust generation, don full protective equipment (respirator, gloves, chemical goggles, suit)
Environmental Precautions: Prevent entry into sewers, soil, surface water, or groundwater; contain spilled material if safe to do so
Spill Cleanup Methods: Collect spill using spark-proof, non-metallic tools; place in labeled, closed containers; neutralize area with sodium bicarbonate solution if possible
Decontamination: Wash area with copious water after cleanup; ensure all residues are collected and containerized for safe disposal
Notification Procedures: Inform local authorities and hazardous material response teams in event of large spill
Safe Handling: Handle away from heat sources, sparks, and open flames; avoid mechanical friction and shock; pour only in inert atmosphere where possible
Personal Hygiene: Do not eat, drink, or smoke while handling; wash hands and exposed skin thoroughly after use
Storage Conditions: Keep containers tightly closed in a cool, dry, well-ventilated place; segregate from acids, bases, combustible materials, and reducing agents
Storage Incompatibilities: Separate from oxidizers, strong reducing agents, and moisture
Packaging Materials: Store in anti-static, chemical-resistant containers with clear hazard labeling
Engineering Controls: Use fume hood, glove box, or other effective local exhaust system; ensure negative pressure in the working area
Personal Protective Equipment: Chemical splash goggles, impermeable gloves (nitrile, butyl rubber), flame-retardant laboratory coat, full face shield for bulk handling, and respiratory protection for dust or aerosol exposure
Occupational Exposure Limits: None established for this compound; treat as hazardous substance
Other Controls: Use only equipment rated as explosion-proof; establish procedures for emergency decontamination
Monitoring: Routine surface and air sampling in high-use laboratories or facilities
Appearance: Crystalline solid, pale yellow to tan
Odor: Slight, may resemble organic amine
Odor Threshold: Data not available
pH: Not applicable (non-aqueous solid)
Melting Point/Freezing Point: Decomposes before melting, range supplied by manufacturer
Boiling Point/Range: Not applicable
Flash Point: Not established; expect non-flammable but energetic decomposition
Evaporation Rate: Not applicable
Solubility: Limited in water; dissolves in polar organic solvents such as methanol, ethyl acetate
Vapor Pressure: Not significant at room temperature
Relative Density: Approximately 1.5 g/cm³, consult certificate of analysis
Other Properties: Vigorous exothermic decomposition with heat, friction, or shock; may emit irritating or toxic fumes in these events
Chemical Stability: Unstable to heat, light, moisture, impact; sensitive to mechanical shock and rapid temperature changes
Possibility of Hazardous Reactions: Rapid exothermic decomposition may occur on contact with organic materials, reducing agents, or acids
Conditions to Avoid: Elevated temperatures, static discharge, direct sunlight, mechanical shock, incompatible chemical storage
Incompatible Materials: Strong acids, bases, reducing agents, peroxides, combustible materials, moisture
Hazardous Decomposition Products: Nitrogen oxides, hydrogen fluoride, boron compounds, carbon gases under severe conditions
Routes of Exposure: Inhalation, skin contact, ingestion, eye contact
Acute Toxicity: Harmful to fatal at moderate dose levels; effects include headache, nausea, respiratory irritation
Skin Corrosion/Irritation: Causes pronounced irritation, erythema, possible blistering on contact
Serious Eye Damage/Eye Irritation: Produces significant eye pain, conjunctival redness, corneal injury
Respiratory Sensitization: Risk of asthmatic response in sensitized individuals
Chronic Effects: Potential for allergic dermatitis, cumulative toxicity not well characterized
Carcinogenicity/Mutagenicity/Reproductive Toxicity: No long-term animal studies reported in literature
Aquatic Toxicity: Harmful to aquatic organisms based on analogues; risk of acute and chronic effects in water bodies
Soil Mobility: Expected to bind to soils and sediment or hydrolyze slowly; limited mobility under ambient conditions
Persistence and Degradability: Decomposition releases toxic and persistent byproducts; full breakdown timeframe unknown
Bioaccumulation: Potential low to moderate based on partition properties; weight of evidence on accumulation impacts pending
Other Adverse Effects: Ingredients may impair wastewater treatment; prevent release to environment where possible
Disposal Methods: Incinerate in approved chemical waste facility equipped for acid gases, or dispose as hazardous waste according to national law
Contaminated Packaging: Treat containers as hazardous; triple rinse, puncture to prevent reuse, ship to approved reclaimer
Special Precautions: Do not flush to sewer or regular waste; notify licensed hazardous waste contractors for arrangements
Regulatory Requirements: Comply with all local, regional, and national waste disposal regulations
UN Number: UN3383 (for diazonium compounds, solid, stabilized)
Shipping Name: Diazonium compound, solid, stabilized, N.O.S.
Transport Hazard Class: 4.1 (Flammable solid), 6.1 (Toxic solid) as applicable
Packing Group: II or I, based on supplier hazard determination
Environmental Hazards: Marine pollutant limitations may apply
Special Precautions: Store and transport only in tightly sealed containers, under inert atmosphere if recommended; avoid rough handling, impact, and temperature swings
Global Inventory Status: May not appear on all chemical inventory lists (TSCA, EINECS, REACH, DSL, etc.)—check with supplier and regulatory authority
OSHA Hazard Classification: Toxic, irritant, reactive
WHMIS Classification (Canada): D1B, D2B, D2A, F (oxidizing material), based on data
SARA Title III: Not specifically listed but may qualify under Section 313—consult facility EHS manager
Other Regulation: SDP, CWC, local safe handling codes—review country-specific legislation
Label Elements: Must display hazard pictograms, GHS statements, risk codes, and emergency contact details on primary containers and shipping paperwork
