© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: 2,5-Dibutoxy-4-(4-Morpholinyl)Benzenediazonium Tetrachlorozincate (2:1)
Synonyms: No widely recognized synonyms
Recommended Use: Laboratory chemical, dye industry intermediate, specialty chemical synthesis
Manufacturer: Qualified chemical supply companies
Contact Information: Emergency phone number and address provided by supplier upon order
CAS Number: [Contact supplier for current registry number]
Product Code: Supplied with product documentation
Emergency Overview: Pale yellow to light orange solid, faint chemical odor, moisture sensitive, decomposes in strong light
GHS Classification: Acute toxicity, oral (Category 3); skin sensitization (Category 1); specific target organ toxicity, single exposure (Category 2, central nervous system)
Signal Word: Danger
Hazard Statements: Harmful if swallowed, may cause allergic skin reaction, suspected of causing organ damage, contact with moisture may cause decomposition
Precautionary Statements: Avoid breathing dust or vapor, use only outdoors or in a well-ventilated area, wash thoroughly after handling, do not eat or drink when using this chemical, wear protective gloves and clothing
Prolonged Exposure Effects: Potential skin and respiratory sensitization, central nervous system effects, irritation to eyes and mucous membranes
Label Elements: Exclamation mark, health hazard symbol, corrosive pictogram for zinc salt component
Main Component: 2,5-Dibutoxy-4-(4-Morpholinyl)Benzenediazonium Tetrachlorozincate (2:1); approximately 100% by weight
Relevant Impurities: Trace moisture, wind-borne dust, minor residuals from synthesis (<1%)
Molecular Formula: C18H32N4O4ZnCl4
Molecular Weight: Provided by supplier certificate
Other Ingredients: No significant additives deliberately included
Exposure Limits: Not established for this compound by OSHA, ACGIH, or NIOSH
Inhalation: Remove person to fresh air, keep warm and at rest, seek medical attention promptly if symptoms like cough or shortness of breath occur
Skin Contact: Rinse thoroughly with water for at least 15 minutes, remove contaminated clothes, call medical care if irritation or sensitization develops
Eye Contact: Flush eyes gently with clean water for 15 minutes, use fingertips to keep eyelids apart, consult physician immediately
Ingestion: Do not induce vomiting, rinse mouth, drink small amount of water if conscious, obtain urgent medical advice
Symptoms to Watch: Nausea, rash, respiratory distress, persistent headache, dizziness
Note to Physicians: Provide symptomatic support, monitor for allergic and respiratory reactions, maintain airway and circulation as needed
Suitable Extinguishing Media: Dry chemical powder, carbon dioxide, foam; avoid water if possible due to instability
Special Hazards: May release toxic fumes of nitrogen oxides, hydrogen chloride, zinc chloride under fire conditions
Protective Equipment: Wear full protective gear, self-contained breathing apparatus, avoid inhaling fumes
Specific Hazards: Dust can form explosive mixture, decomposition exothermic, rapid breakdown if exposed to moisture or direct flame
Personal Precautions: Avoid dust formation, ventilate area, evacuate unnecessary personnel, wear respiratory and skin protection
Environmental Precautions: Prevent release into drains, sewers or soil, report large spills to local authorities
Clean-Up Methods: Sweep up without generating dust, collect in dry, closed containers, dispose according to local regulations, wash spill area with detergent solution
Containment: Dike spill with inert material, avoid water-reactive procedures, use spark-proof tools
Handling: Use in fume hood, avoid contact with skin, eyes, and clothing, handle only with dry, clean tools, keep away from ignition sources
Storage: Keep container tightly sealed, store in a cool, dry, well-ventilated area, segregate from acids, bases, reducing agents, moisture and light, use secondary containment if possible
Incompatibilities: Water, oxidizers, acid chlorides, reducing agents, strong acids and bases
Other Precautions: Maintain daily inspection of storage area for leaks or damage
Engineering Controls: Use local exhaust, chemical fume hood, ventilation to keep levels below exposure limits
Personal Protective Equipment: Nitrile gloves, chemical-resistant apron, goggles or safety glasses, face shield if splashing possible, certified respirator for dust or vapor
Work Practices: Remove contaminated clothing after use, wash hands thoroughly before eating or drinking, avoid touching face
Environmental Exposure: Limit emissions to air, segregate chemical waste, maintain proper labelling
Appearance: Pale yellow to orange crystalline powder
Odor: Mild, faintly chemical
pH: Not applicable (not soluble in water)
Melting Point: Decomposes before melting, estimated >120°C
Boiling Point: Not available (compound decomposes)
Solubility: Insoluble in water, soluble in selected organic solvents
Vapor Pressure: Not determined
Density: Check supplier for sample-specific density
Flash Point: Not Flammable in bulk solid form
Explosive Properties: Potential for explosiveness as dust in air, avoids static
Chemical Stability: Stable under recommended storage, decomposes on exposure to light, heat, or moisture
Reactivity: Reacts with acids, bases, water, may release gases
Hazardous Decomposition: Releases nitrogen oxides, morpholine, zinc chloride, hydrogen chloride
Polymerization: No hazard expected
Incompatibles: Avoid contact with moisture, acids, strong oxidizers
Acute Toxicity: Harmful if swallowed; LD50 data on structurally similar diazonium compounds show moderate oral toxicity
Skin Contact: Can cause irritation, possible allergic reactions with repeated contact
Eye Contact: Direct contact produces eye irritation, redness, pain
Inhalation: Dust or vapor exposure irritated lungs, central nervous system symptoms, possible headache
Chronic Effects: Long-term exposure linked to allergies, dermatitis, respiratory sensitization in similar chemicals
Carcinogenicity: No data available for this specific compound, mutagenic in bacterial assays possible for diazonium group
Other Risks: Absence of comprehensive testing leaves some risk undetermined, prudent avoidance of prolonged exposure warranted
Aquatic Toxicity: Harmful to aquatic organisms based on zinc and morpholine content
Persistence and Degradation: Expected low biodegradability, persists in water and soil
Bioaccumulation: Potential for bioaccumulation in aquatic food chains
Mobility in Soil: Mobile due to water solubility of breakdown products
Other Hazards: Discharge to water systems can disrupt local environments, increased turbidity from insoluble crystals
Waste Handling: Treat as hazardous waste, collect for incineration in licensed facility
Container Disposal: Triple rinse before discarding, puncture to prevent reuse, follow local regulations
Sewage Disposal: Prohibited, do not discharge into public sewers or drains
Special Precautions: Consult chemical disposal experts for large volumes, segregate cyanide-bearing waste
UN Number: Seek carrier and regulatory guidance for current shipping number (likely UN3386 for diazonium salts, moist)
Proper Shipping Name: Diazonium compound, stable, dry or moist
Transport Hazard Class: 4.1 Flammable solid, self-reactive
Packing Group: II
Marine Pollutant: Yes, contains zinc and organics
Special Transport Precautions: Avoid extreme temperatures, keep dry, use dedicated chemical containers
OSHA Status: Hazardous substance under OSHA definitions
TSCA Inventory: Confirmed by supplier, specialty research compounds subject to restriction
SARA 313: Contains zinc, subject to reporting
REACH Status: Pre-registered for laboratory/research only, non-commercial uses suggested; consult European regulations
Labeling Requirements: Must carry hazard pictograms, warning statements, manufacturer contacts
Other Regulatory Notes: National and state environmental authorities may impose discharge limits for zinc- and morpholine-derived pollutants
