© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Name: 2,2-Bis(Tert-Amylperoxy)Butane
Content: Up to 57% active, with Type A Diluent filling out at least 43%
Appearance: Usually comes as a clear, colorless to pale-yellow liquid, the kind that doesn’t shout danger, but experience says some of the quietest chemicals create the most fuss.
Class: Organic peroxide, known for instability and fire risk
Hazards: Can catch fire in ways you don’t expect, causes severe skin and eye irritation, breathing in vapors means trouble for airways, and accidental exposure can throw off a workday instantly
Symbols: Flame, exclamation mark indicating immediate safety steps always matter
Active Ingredient: 2,2-Bis(Tert-Amylperoxy)Butane, makes up most of the strength of the mixture
Diluent: Type A, keeps the substance stable under normal use, but doesn’t make it harmless
Other Traces: No added stabilizers or irrelevant fillers, at least not in any documented, transparent way
Eye Contact: Rinse with running water for several minutes, look for redness or pain
Skin Contact: Strip away contaminated clothing, use soap and water—been through this routine before and quick action pays off
Swallowing: Medical attention right away, don’t try home remedies
Breathing Vapors: Fresh air, supportive care, and have emergency numbers within reach especially in small, poorly ventilated areas
Extinguishing Media: Dry powder, foam, carbon dioxide—water may not do the job and sometimes spreads risk
Hazards in Fire: Risk of toxic smoke, gases such as carbon monoxide and carbon dioxide likely
Protective Gear: Full face mask, self-contained breathing apparatus, the kind you don’t leave in the truck because “it’s just a small job”
Personal Protection: Rubber gloves, splash-proof goggles, face shields, and non-static footwear are the minimum
Containment: Use sand, vermiculite, or inert absorbents to halt the spread—in emergencies, rely on physical boundaries, not hope
Ventilation: Don’t stay in enclosed spaces, big fans mean safer cleanup
Disposal: Scoop and seal in labeled drums, send to a chemical waste facility, never down the drain or in regular trash—environmental trouble follows carelessness
Handling: Keep containers sealed, avoid shaking or jarring, always open and use in well-ventilated spaces
Storage: Cool, dry, separate from combustibles, out of sunlight, never stack near flammable solvents—old hands know chemical neighbors decide whether things stay safe or turn ugly
Avoidance: No smoking, no welding, no open flames nearby, no exceptions
Engineering Controls: Local exhaust ventilation, spark-proof outlets, static-release floors and work surfaces
Personal Protection: Chemical-resistant gloves, full-length aprons, and tight-fitting eye protection even for “quick jobs”
Work Practices: Change gloves after contact, wash hands thoroughly before breaks, never eat or drink in the workspace
Form: Liquid at room temperature
Odor: Mild, sometimes fruity, but don’t rely on nose alone for detection
Boiling Point: Roughly 137–150 °C, but risk starts far below that
Solubility: Limited in water, mixes with organic solvents
Stability: Sensitive to heat, shock, and friction—commonly overlooked by those new to these compounds
Stability: Stable with proper handling, but heat, sunlight, or mixing with the wrong stuff can kick off dangerous reactions
Incompatibility: Strong acids, bases, metals, and anything that acts as a fuel—these combinations spell trouble
Decomposition: Produces heat, flammable gases, and potentially dangerous organic vapors, especially if fire breaks out
Skin Contact: Redness, blistering, chemical burns.
Eye Contact: Serious irritation, possible damage even if washing happens quickly.
Inhalation: Coughing, shortness of breath, and head pain—ventilation means everything in confined spaces.
Long-Term: No clear evidence of chronic health effects, but repeated exposure writes a different story for every worker.
Aquatic Toxicity: Harmful to aquatic life, persistence can last well after a spill.
Degradability: Breaks down slowly if it enters water or soil, adds strain to local ecosystems.
Bioaccumulation: Usually low, but large spills mean cleanup takes priority over theory—actions count where numbers fail.
Method: Incinerate in an approved facility, never in open air or home setups.
Avoid: Sewer, storm drains, regular dumpsters—these routes move problems downstream, literally and legally.
UN Classification: Organic peroxide, type F; regulated strictly.
Hazard Label: Flaming O symbol, keep in mind for all shipping papers.
Packing: Secure, vented drums or original manufacturer’s vessels, never substitute with general-use containers.
Regulations: Covered by international, national, and regional chemical safety acts—even small businesses answer for safe practices.
Documentation: Accurate labeling, training logs, and storage records—regulators and insurers ask for them after any incident.
Workplace Practices: Training beats paperwork—anyone near this material deserves clear information, not just instructions.
