© 2026 Sinochem Nanjing Corporation,
All Right Reserved
Product Name: 1-Methyl-1-Cyclopentene
Chemical Formula: C6H10
Synonyms: Methylcyclopentene
Appearance: Clear, colorless liquid, with a distinctive hydrocarbon odor
Common Uses: Intermediate in organic synthesis, applied in research settings, found in specialty chemical manufacturing
CAS Number: 693-89-0
Understanding exactly what sits in the container matters, because traded containers sometimes differ from what the label suggests, and using the wrong chemical in a process can lead to accidents nobody wants on their conscience.
GHS Classification: Highly flammable liquid and vapor, causes skin and eye irritation, may cause drowsiness or dizziness
Main Hazards: Fire risk due to low flash point, inhalation vapor exposure leading to narcosis, possible mild toxicity by skin absorption
Signal Word: Danger
Pictograms: Flame, exclamation mark
Real safety begins by actually reading these labels before disposing of the packaging—relying on memory or routine amplifies risks, especially with flammable and irritant chemicals like this. Instead of acting on habits, take a second look at pictograms or warning words before moving forward, even if the process seems routine.
Chemical: 1-Methyl-1-Cyclopentene
Concentration: Usually supplied as pure or high-purity product
Impurities: Minimal unless noted, but trace cyclopentene or other methylcyclopentenes could be present depending on synthesis method
People tend to underestimate how trace amounts of chemical cousins can change reaction outcomes or impact exposure toxicity. Attention to purity levels, not just the main compound, prevents unplanned lab emergencies.
Inhalation: Move person immediately to fresh air, maintain an open airway, seek medical attention if any symptoms like dizziness, headaches, or nausea occur
Skin Contact: Flush thoroughly with water for several minutes, remove contaminated clothing, look for signs of redness or irritation
Eye Contact: Rinse eyes cautiously with water, remove contact lenses, continue rinsing and get medical help if irritation persists
Ingestion: Rinse mouth, do not induce vomiting, seek medical advice without delay
Many workers hesitate to seek help fast enough after minor exposure; timely rinsing, moving to fresh air, and not downplaying symptoms supports better outcomes, which ultimately helps both individual and team wellbeing in the long run.
Suitable Extinguishing Media: Use foam, dry chemical, or carbon dioxide—water can spread the liquid and intensify hazard
Hazardous Combustion Products: Carbon monoxide, carbon dioxide, and possible toxic hydrocarbon fumes if burned incompletely
Precautions for Firefighters: Wear self-contained breathing apparatus and full protective clothing
Fires in chemical settings turn routine safety work into critical response situations. Having proper extinguishers near storage areas makes a genuine difference, and well-trained personnel who know what to expect in terms of fumes and spread are essential.
Personal Precautions: Eliminate ignition sources, ventilate area, avoid skin contact and inhalation, use proper gloves and goggles
Spill Cleanup: Absorb with inert material like dry sand or earth, collect in suitable containers for disposal, wash the area thoroughly after removal
Environmental Precautions: Keep material out of drains and waterways by containing and collecting spills promptly
Quick, clear communication during leaks or spills means less time for vapors to build up or migrate and less potential for environmental contamination. It makes sense to run spill response drills so the team stays sharp and knows what tasks matter most as soon as a spill occurs.
Safe Handling: Avoid breathing vapors, wear suitable PPE, handle in fume hood or well-ventilated space, keep containers tightly closed
Storage Recommendations: Store in a cool, dry, well-ventilated place, separate from oxidizers and acids, ground all containers to prevent static discharge
Well-chosen storage practices separate incidents from uneventful days. Storing flammables apart from strong oxidizers, clearly labeling shelves, and rigorously tracking container inventory lowers costs from scrap losses and insurance and keeps staff from surprise exposures.
Engineering Controls: Employ local exhaust ventilation or chemical fume hoods; general ventilation fails to protect against volatile vapor buildup
Personal Protection: Use chemical-resistant gloves, eye protection, and protective clothing; if airborne concentrations rise, use proper respirator
Not every workplace invests in modern ventilation updates, but a fume hood or even a well-sealed extraction fan can turn a risky operation into a much safer one. Personal protection isn’t a luxury or an afterthought; people need to see their own faces in the mirror the next day.
State: Liquid
Color: Clear, colorless
Odor: Sweet, gasoline-like
Flash Point: Just below room temperature, typically near -12°C (10°F)
Boiling Point: Roughly 90°C (194°F)
Vapor Pressure: Noticeable at room temperature
Density: About 0.8 g/cm³ at 20°C
Short-cuts on reviewing key numbers for boiling point, flash point, or density often trip up new techs expecting one solvent, getting another. Understanding these differences matters when designing ventilation, picking compatible containers, or selecting gear for transfers.
Chemical Stability: Stable under recommended storage conditions
Conditions to Avoid: Heat, sparks, flames, extremes of temperature, contact with oxidizing agents
Hazardous Decomposition: Fumes of carbon monoxide, carbon dioxide, possibly other hydrocarbons
Chemicals typically give back as much care as they receive. Using labeled storage, respecting temperature guidelines, and not mixing unknowns together provides peace of mind and removes unnecessary risk from the workday.
Routes of Exposure: Inhalation, skin, eye contact, ingestion
Acute Effects: Drowsiness, headaches from inhalation, skin/eye irritation on direct contact
Chronic Effects: No comprehensive long-term data, but similar compounds have shown central nervous system effects with repeated high exposure
It’s easy to forget the actual costs that come from uncontrolled chronic exposure. Building in practical rest cycles, air monitoring, and exposure tracking marks the line between routine productivity and eventual health complaints, which can easily turn into workers’ comp claims and lost productivity.
Aquatic Toxicity: Limited data, but hydrocarbon liquids of this type often carry risks for aquatic life, creating film on water surfaces, inhibiting oxygen transfer
Persistence and Degradability: Can persist if released in significant quantities, though photodegradation under sunlight occurs over time
Bioaccumulation: Not expected to accumulate deeply in animal tissue, but repeated releases can still lead to local ecosystem disruption
Many overlook environmental effects, but even brief, minor spills in urban or lab settings spread through drains and affect wider systems. Proper spill kits, secondary containment, and training not only help the environment—they minimize regulatory fines and bad press.
Waste Disposal: Require incineration in approved facilities or pickup by licensed chemical waste handlers; never discard in regular trash or down drains
Empty Containers: Triple-rinse and send for hazardous waste recycling or incineration
Used solvents often remain hazardous even after draining, and proper tracking and disposal lower both insurance risk and future liability—hidden chemicals in drains have led to costly remediation and even shutdowns.
UN Number: UN 3295 (for hydrocarbon liquids, n.o.s.)
Proper Shipping Name: Hydrocarbons, liquid, n.o.s. (1-Methyl-1-Cyclopentene)
Hazard Class: 3 (Flammable liquids)
Packing Group: II
A lot of chemical incidents actually come down to shipping mistakes. Unclear labeling, wrong manifest codes, or easy-to-miss packaging issues can spark regulatory fines, lost product, or even emergency cleanups—taking a moment to double-check the proper protocols saves money and stress.
GHS/CLP Compliance: Signal words, pictograms, and H-statements must match handling risks
SARA 311/312: Covered due to fire hazard, acute toxicity
OSHA Status: Meets criteria for hazardous chemical; workplace plans must address proper handling and storage
Local and international rules can trip up even experienced handlers. Skipping the paperwork or settling for partial compliance leads to more attention from inspectors and greater business risk. Staying updated on the law also protects workers and communities and keeps operations running smoothly.
